Suggested Block Packaging Instructions
  • 1. Strip Block of all bolt on/bolt in items except water plug. Remove all head studs if equipped, external studs that stick out, and all sensors & senders. We will NOT be held responsible for lost bolt-on items that have to be removed for machining purposes. There will be an additional charge of $50.00 for removal. Degrease block and clean, so there is no dripping oil.

  • 2. Use a 18" x 18" x 15" Heavy Duty Box for shipping. These boxes can usually be purchased from the UPS Store or U-Haul fairly cheap. Cut 2 pieces of thin plywood to fit the box opening. ( 17 1/4" x 17 1/4" )

  • 3. Place 1 piece of wood in bottom of carton.

  • 4. Place 3 inches of bubble wrap on top of wood.

  • 5. Place block on packing material - crank end down against piece of wood.

  • 6. Pack bubble wrap, NOT PACKING POPCORN/PEANUTS, firmly between block and carton with 3 inches on top.

  • 7. Place second piece of plywood on top.

  • 8. Pack more bubble wrap on top of plywood, so there is no movement when box is sealed shut.

  • 9. Please print and fill out our BLOCK SLEEVING CUSTOMER INFO FORM and put in Box.

    • PLEASE DO NOT USE PACKING POPCORN/PEANUTS - it breaks down and doesn't provide any support for the block. It will also get into oil and coolant passages. If this happens we will charge an additional $25.00 Fee. Please insure your package. We are NOT responsible for any damage during shipping of your block to our facility. We will insure your block when it leaves our shop.

    Custom Design Performance.com, llc.

    28 Barbara Road
    Vernon, CT 06066
    Verizon (860) 614-6381


    Send E-Mail to Ken Carlson with questions or comments about this web site.
    Copyright © 1987-2007, Custom Design Performance.com,llc

    NOT RESPONSIBLE FOR TYPOGRAPHICAL ERRORS. SPECIALS NOT AVAILABLE AT ALL LOCATIONS, BRAND NAMES MAY VARY. PRICES SUBJECT TO CHANGE WITHOUT NOTICE.