PERFORMANCE PARTS INCLUDE:
- New "Keith Black" or "Speed Pro" HyperEutectic Pistons and Pins
- New "Speed Pro" Plasma Moly Piston Rings
- New "Clevite" Rod Bearings
- New "Clevite" Main Bearings
- New "Durabond" 1 Piece Camshaft Bearings
- New "Melling" Oil Pump, Screen, and Shaft
- New "Comp. Cams" or "Crane Cams" Camshaft and Lifters
- New "Cloyes" or "Comp. Cams" True Double Roller Timing Chain and Gear Assembly
- New "Comp. Cams" Precision Rocker Arms
- New "Comp. Cams" Chrome Moly Pushrods
- New "Pioneer" Brass Freeze Plugs
- New "Felpro" Gaskets
- New "Pioneer" or "ARP" Performance Head Bolts
- New "ARP" Connecting Rod Bolts and Nuts
- New "Manley" Stainless Steel Intake and Exhaust Valves
- New "SBI" Hardened Exhaust Seats Installed (when applicable)
- New "K-Line" Bronze Bullet Intake and Exhaust Valve Guides
- New "Comp. Cams" Valve Springs, Retainers, and Valve Locks
- New "Teflon" Positive Valve Stem Seals
- New "Fram" Oil Filter, & "Valvoline" Oil
|
PRECISION MACHINING INCLUDES:
Block:
- Chemically Cleaned and Magnaflux Inspected
- Airless Shot Peen Blasted to Remove All Rust
- Blocks are Blueprint Bored w/ our Rottler F65
- Cylinders Precision Honed w/ torque plates
- Deck Surfaces Blueprint machined true & square
- Align Bore Checked and Align Honed if Required
- Connecting Rods Resized with New ARP Bolts and Nuts
- Crankshaft Precision Index Ground and Micro Polished
Heads:
- Chemically Cleaned and Magnaflux Inspected
- Airless Shot Peen Blasted to Remove all Carbon & Rust
- New Bronze Liner Valve Guides Installed
- Hardened Exhaust Seats Installed when Required
- Precision Performance Multi-Angle Serdi Valve Job for HP
- All Gasket Surfaces Machined Flat
- All Valve Heights & Spring Pressures Checked
Assembly:
- Engine Assembly is Fully Balanced & Blueprinted to Race Specs., then
Assembled in our "Clean Room".
|
