PARTS INCLUDE:
- New Pistons and Pins
- New Moly Piston Rings
- New Rod Bearings
- New Main Bearings
- New Camshaft Bearings
- New Oil Pump, Screen, and Shaft
- New Camshaft and Lifters
- New Timing Chain and Gear Assembly
- New Rocker Arms
- New Pushrods
- New Freeze Plugs
- New Felpro or McCord Gaskets
- New Connecting Rod Bolts and Nuts
- New Intake and Exhaust Valves
- New Hardened Exhaust Seats Installed (when applicable)
- New Intake and Exhaust Valve Guides
- New Valve Springs
- New Positive Valve Stem Seals
- New Oil Filter
|
MACHINING INCLUDES:
Blocks
- Only Seasoned Cores, NOT Liteweight, Prone to Crack, Made in Mexico Cores!
- Chemically Cleaned and Magnaflux Inspected
- Cylinders Bored and Honed Oversize
- Deck Surfaces Checked and Machined if Required
- Align Bore Checked and Machined if Required
- Connecting Rods Resized with New ARP Bolts and Nuts
- Crankshaft Precision Index Ground and Polished
Heads
- Chemically Cleaned and Inspected
- Pressure Tested and/or Magnafluxed
- New Bron-El Valve Guides Installed
- Hardened Exhaust Seats Installed if Required
- Precision Multi-Angle Serdi Valve Job Performed
- All Gasket Surfaces Checked and Machined Flat
- All Valve Heights and Spring Pressures Checked
|
