| Most 4 Cylinder Import Labor Applications | Price |
|---|---|
| Sleeve Machining and Installation - Your Sleeves | $800 Labor |
| Shot Clean Block | $100 |
| Check Main Bearing Bores | $50 |
| Mag Crankshaft | $50 |
| Mic Crankshaft | $25 |
| Polish Crankshaft and Final Clean | $75 |
| R & R Pistons from Rods and Clean and Check Size | $50 |
| Line Hone Main Bearing Bores in Block | $250-$350 |
| Square Block Deck | $100 |
| Bore for Sleeves, Install and Hone with Torque Plates (Labor Only) | $800 |
| CNC Bore Block with Torque Plate | $250 |
| Balance Complete Assembly | $250 |
| Balance Just Crankshaft | $150 |
| Install Pistons on Rods | $50 |
| R & R Oil Pump | $75 |
| Pressure Check Head | $75 |
| Comp. Valve Job, most 16 valve heads | $350 + |
| Resurface Head | $75 |
| Street Porting | $350 |
| Comp. Porting | $500 + |
| Final Wash Block | $75 |
| Fit Ring End Cap - File Fit Rings | $50 |
| Assemble Short Block 4cyl - Accessories Extra | $350 |
| Assemble Short Block 6cyl - Accessories Extra | $450 |
| Most Subaru EJ20 / EJ22 / EJ25 / EJ257 / STI Labor Applications | Price |
|---|---|
| Subaru Sleeve Machining and Installation - Your Sleeves | $1000 Labor |
| Disassemble & Inspect Short Block | $150 |
| Mag Crankshaft | $50 |
| Mic Crankshaft | $25 |
| Polish Crankshaft and Final Clean | $75 |
| Grind Crankshaft | $175 |
| R & R Pistons & Rods | $40 |
| Line Hone Main Bearing Bores in Block | $350 |
| Square Block Deck on Rottler CNC | $200 |
| CNC Bore and Hone Block with Pair of Subaru Jugs | $350 |
| Balance Assembly | $250 |
| Balance Cranl Only | $150 |
| Comp. Multi Angle Valve Job | $350 |
| Resurface Subaru Heads | $150 |
| Set Valve Lash, Solid Pucks | $250 |
| Final Wash Block | $125 |
| Fit Ring End Gap - File Fit Rings | $54 |
| Assemble Short Block 4cyl - Accessories Extra | $450 |
| Open Up Chambers on EJ20 heads for EJ25 Short Block | $350 |